Industrial Resin Flooring in Esher
Your floor is breaking up under forklift traffic, chemical spills or heavy point loads, and you need a system that will actually survive. We survey Esher and KT10 sites, specify the right epoxy or polyurethane screed for your exact loads and environment, and install it ourselves.
- Free surveys
- Fully insured
- No subcontractors
- Written guarantee
When Standard Floor Paint Keeps Letting You Down
If your current coating is delaminating in tyre tracks or lifting around your machinery, that is not bad luck. It is the wrong product for the job, and no amount of repainting fixes that.
Industrial resin is a fundamentally different category. High-build epoxy and trowelled polyurethane screeds are engineered to handle compressive loads, resist cutting oils and hydraulic fluid, and outlast decorative floor paint by a decade or more. The system we specify depends on what your floor actually has to cope with: a clean assembly area is a different job from a press shop with dropped tooling and thermal cycling.
Getting it right starts with the substrate, not the brochure. We measure moisture, assess oil contamination, check for structural cracks and confirm the concrete profile before we ever name a system. That is what the free site survey is for.
What we check on every Esher industrial survey
- Moisture content and whether a DPM-grade primer is required
- Depth of any oil contamination and which primer system is appropriate
- Condition of expansion joints, spalled concrete and structural cracks
- Forklift routes and point-load areas to confirm system thickness
- Ambient temperature and ventilation, which directly affect cure times
Free industrial flooring survey in Esher and KT10
We offer free, no-obligation site surveys for industrial units across Esher and the surrounding KT10 area. Contact us to arrange a visit and receive a written quote with full scope, system specification and programme.
Get my free quote07845 437527Where to go from here
Industrial Resin Flooring
High-build epoxy coatings and trowelled polyurethane screeds for factories, engineering workshops and fabrication units in Esher and KT10.
View serviceWarehouse Flooring
Forklift-rated epoxy systems for high-traffic warehouse and distribution environments across Esher and the surrounding area.
View serviceAnti-Slip Resin Flooring
R-rated anti-slip profiles from R10 to R13 for wet process areas, chemical handling zones and compliance-critical floors.
View serviceLine Marking and Demarcation
Two-pack epoxy line marking for pedestrian walkways, MHE routes and safety demarcation on Esher commercial and industrial sites.
View serviceEpoxy and Polyurethane Systems for Esher Industrial Sites
Two systems cover the vast majority of industrial environments in Esher. High-build epoxy coating at 500 to 1,000 microns suits medium-duty manufacturing, assembly areas and light production. It resists oils, fuels and dilute acids, and is significantly cheaper per square metre than a screed.
Where you have heavy forklifts, dropped tooling, or any risk of thermal shock from steam cleaning or hot liquid, a trowel-applied polyurethane screed at 4 to 9mm is the correct specification. It provides extreme impact resistance and, at 9mm, handles thermal shock up to 120 degrees Celsius. We specify anti-slip quartz broadcast in any wet process or chemical handling zone.
How We Survey and Specify for Esher Commercial Units
Every project starts with a free site visit. We bring moisture meters, a concrete profile reference and enough experience to ask the questions that matter: what chemicals are being spilled, how heavy the traffic is, what the curing window looks like around your operations.
The written quote that follows sets out the system, thickness, preparation scope, and programme. We include what is covered and, where relevant, what falls outside the quoted scope. No surprises on the day.
What the written quote covers
- System specification with product type and applied thickness
- Preparation scope: grinding profile, crack repairs, joint assessment
- Primer type selected for your moisture reading and contamination level
- Programme with cure milestones and return-to-traffic timescales
- Line marking or anti-slip broadcast if included in scope
- Aftercare handover and care guide
Scheduling Work Around Your Esher Operations
Downtime costs money. We work through the programme with you before we start so you can plan around grinding, priming, system application and cure. Minimum return to forklift traffic is typically 48 hours at 20 degrees Celsius, but cold industrial units extend that window and we measure temperature and humidity throughout to adjust accordingly.
Phased installation, where we section off parts of the unit and keep the rest operational, is something we can discuss at survey stage depending on the layout of your site.
Areas Around Esher We Cover for Industrial Flooring
Esher sits in the KT10 postcode district, and our installation teams cover all surrounding areas without a call-out charge. Nearby locations we serve include Claygate, Hersham, Hinchley Wood, Thames Ditton, Weston Green and Molesey, as well as the wider Surrey and South East region.
The A307 runs through the town and the A3 at its southern edge both support straightforward heavy vehicle access for equipment and materials.
Serving Industrial Units in Esher and the KT10 Area
Esher is predominantly suburban in character, with a linear commercial high street along the A307 and relatively few large industrial buildings within the ward itself. Industrial and commercial units in and around Esher are typically smaller in footprint than those on major Surrey business parks, which influences how we plan access for grinding equipment and materials. We cover Esher and all surrounding KT10 locations including Claygate, Weston Green, Hinchley Wood and Hersham, and there is no call-out charge for sites within Surrey.
- Esher is predominantly suburban with few high-rise buildings and a linear commercial high street, meaning most industrial and commercial units here are relatively compact in scale.Wikipedia
- The A307, historically the Portsmouth Road, forms approximately one mile of Esher's high street and is the main route through the town, relevant when planning vehicle access for equipment deliveries.Wikipedia
- The A3 Portsmouth Road forms the southern boundary of Esher at urban motorway standard, providing straightforward heavy vehicle access from the south for sites in that part of town.Wikipedia
- Claygate is approximately 1.8 km from the centre of Esher and falls within the KT10 postcode district, covered as part of our Esher area service.Wikidata
- Hersham is approximately 2.5 km from Esher's centre and is one of the nearby locations we cover for industrial resin flooring without a call-out charge.Wikidata
- Postcode districts
- KT10
- Nearby places
- West EndLower GreenClaygateWeston GreenHinchley WoodFieldcommonHershamOatlands
Want a straight answer on your floor in Esher?
How Our Resin Flooring Installation Works
Survey
We inspect the floor, discuss use and measure the space before recommending a system.
Preparation
We test the substrate and prepare a sound base, including repairs where needed.
Installation
Our team applies the specified system in controlled stages.
Handover
We explain curing, cleaning and when the floor can return to use.
What Industrial Resin Flooring Costs for an Esher Unit
Indicative pricing for industrial resin systems starts at around £20 to £40 per m² for a standard epoxy floor coating, rising to £60 to £110 per m² for a heavy-duty polyurethane screed at 4 to 9mm. The actual figure for your Esher unit depends on floor area, the existing slab condition, how much preparation is required, and the system thickness. Larger areas tend to reduce the per-square-metre rate.
A site survey is the only reliable way to give you an accurate number. Quoting on area alone without assessing the substrate, moisture level and contamination depth is how cheap quotes end up costing more when preparation is skipped and the floor fails early.
What affects the price
- Floor area: larger Esher units benefit from economies of scale on per-m² rates
- Slab condition: oil contamination, cracking or poor surface profile increases preparation cost
- System choice: high-build epoxy coating versus full polyurethane screed carry significantly different price points
- DPM-grade primer: required where moisture readings indicate risk, adds to material cost
- Anti-slip broadcast or line marking: costed separately if included in scope
- Phased installation or restricted access: programme implications discussed at survey
Frequently asked questions
Book a free survey in Esher
Tell us about the floor and we will come and look at it. No obligation, and a written quote afterwards.