Resin Flooring in Esher: Installed Properly, From Survey to Handover
We install epoxy, polyurethane and poured resin floors across Esher and the surrounding KT10 area, with no subcontractors and a written workmanship guarantee. If you want a contractor who will assess your actual substrate before specifying anything, call 07845 437527 or request a free survey below.
- Free surveys
- Fully insured
- No subcontractors
- Written guarantee
Finding a Contractor You Can Trust to Get It Right
Your concern is not really which system to choose. It is whether the person who quotes you will actually prepare the floor properly, put the agreed scope in writing, and show up if something needs attention afterwards.
Resin fails for predictable reasons: concrete that was not ground back, moisture that was not tested, a system specified for a different environment. We check all of this at survey stage, before a single product is specified.
Esher's housing stock is varied, and that matters practically. Converted buildings such as the former Sandown House, now apartments, can have altered floor structures that affect what preparation is needed and which system is appropriate. We ask about any previous use, alterations or added screeds before we recommend anything.
What We Check at Your Esher Site Survey
- Substrate moisture content, tested with a calibrated meter, not estimated
- Concrete condition: cracks, surface laitance, contamination and any previous coatings
- Floor alterations or added screeds: how these affect adhesion and system choice
- The environment: foot traffic, vehicle use, chemical exposure, UV exposure
- Access and working practicalities that affect timescales and scheduling
Free Site Survey for Resin Flooring in Esher
We offer a free, no-obligation site survey for residential and commercial resin flooring across Esher and the KT10 area. We measure up, assess the substrate and give you a written quote with the scope clearly stated before any work begins.
Get my free quote07845 437527Where to go from here
Poured Resin Floors
Applied at 3 to 6mm for a flat, continuous finish. Ideal for open-plan living areas, kitchens and extensions where you want a designer floor without grout lines or joints.
View serviceGarage Floor Coatings
Epoxy and polyaspartic flake systems that resist oil, hot tyre marks and general wear. Specified for how your garage is actually used.
View servicePolyurethane Resin Flooring
UV-stable and slightly more flexible than epoxy, making it well suited to extensions and living areas with underfloor heating or where comfort underfoot matters.
View serviceCommercial Kitchen Flooring
HACCP-compliant polyurethane screed with anti-slip finish and coved skirting. Built for hot water, cleaning chemicals and continuous foot traffic.
View serviceResidential Resin Floors for Esher Homes
Poured resin and polyurethane floors are popular choices for open-plan extensions and kitchen refurbishments. Poured resin, applied at 3 to 6mm, produces a flat, continuous surface with no grout lines. It suits modern interiors well, but it is also unforgiving of substrate problems, so the preparation work underneath it matters more than with thicker systems.
Garage floor coatings are a separate conversation. An epoxy or polyaspartic flake system gives you an oil-resistant, easy-clean surface that is genuinely durable rather than decorative. We specify the coating to match how the garage is actually used, not just how it looks in a brochure.
Commercial Resin Flooring for Esher Businesses
Esher's commercial mix includes offices, workshops and retail premises along and near the A307 high street corridor, as well as business uses further into the KT10 area. The right system depends on the actual demands of your environment: a self-smoothing epoxy suits a retail or office floor, while a polyurethane screed is the correct choice for a commercial kitchen or anywhere with heavy thermal or chemical exposure.
We install HACCP-compliant PU screed with coved skirting for commercial kitchens, forklift-rated epoxy for workshop and warehouse floors, and decorative self-smoothing systems for showrooms and offices. Each specification starts with the site survey, not a standard package.
Commercial systems we install in Esher
- Polyurethane screed for commercial kitchens and food-preparation areas
- Self-smoothing epoxy for offices, retail and car showrooms
- Heavy-duty epoxy and PU for workshops and light industrial units
- Anti-slip R-rated finishes for wet areas and ramps
- MMA fast-cure resin where rapid return to service is critical
Preparation, Scheduling and Aftercare: What to Expect
Every installation starts with diamond grinding to remove surface laitance and give the resin a mechanical key. Any cracks or hollow areas are repaired before priming begins. This is not optional prep that we skip when the job is small.
Your written quote sets out the system, thickness, number of coats, any repair work agreed, and the expected timescales for each stage. At handover, you receive a care guide for your specific system, and if anything is not right after installation, we come back.
What your written quote will confirm
- System specified and total thickness
- Number of coats and any repair scope agreed at survey
- Expected timescale for each stage
- Curing period before the floor is ready for use or traffic
Areas Near Esher We Cover
We cover Esher and the surrounding KT10 and KT12 postcode areas with no call-out charge within Surrey. That includes nearby locations such as Claygate, Hinchley Wood, Hersham, Thames Ditton, West End and Weston Green.
Molesey, East Molesey and Weybridge are also within our regular working area. If you are unsure whether your address is covered, call us and we will confirm straight away.
Nearby areas we regularly serve
- Claygate (approx. 1.8 km from Esher centre)
- Hinchley Wood (approx. 2.2 km)
- Hersham (approx. 2.5 km)
- Thames Ditton (approx. 3.3 km)
- Weybridge and Molesey
Serving Esher and the KT10 Area
Esher is a predominantly suburban town covering a large area between 13 and 15.4 miles southwest of Charing Cross, with its commercial activity centred on the A307 high street. The town's building stock ranges from detached suburban homes to converted properties and local commercial premises. We carry out residential and commercial resin flooring installations across Esher and the surrounding villages, with no call-out charge for anywhere within Surrey.
- Esher is predominantly suburban with few high-rise buildings, meaning most projects are residential extensions, garages and single-storey commercial premises.Wikipedia
- The former Esher Town Hall, now known as Sandown House, has been converted into apartments, illustrating the kind of converted building where floor structure history can affect resin specification.Wikipedia
- The A307 forms approximately one mile of Esher's high street, the main corridor for local commercial premises.Wikipedia
- Claygate is approximately 1.8 km from Esher's recorded centre and is within our regular working area.Wikidata
- Esher covers a large area, lying between 13 and 15.4 miles southwest of Charing Cross.Wikipedia
- Postcode districts
- KT10
- Nearby places
- West EndLower GreenClaygateWeston GreenHinchley WoodFieldcommonHershamOatlands
Want a straight answer on your floor in Esher?
How Our Resin Flooring Installation Works
Survey
We inspect the floor, discuss use and measure the space before recommending a system.
Preparation
We test the substrate and prepare a sound base, including repairs where needed.
Installation
Our team applies the specified system in controlled stages.
Handover
We explain curing, cleaning and when the floor can return to use.
What Resin Flooring Costs for an Esher Project
Indicative prices run from around £20 to £40 per m² for a straightforward epoxy garage coating, up to £70 to £120 per m² for a poured resin floor in a living space or extension. Polyurethane screed for commercial kitchens typically falls in the £60 to £110 per m² range. These are starting points: the final figure depends on your floor area, the condition of the existing slab and the system specified.
Smaller areas often carry a minimum charge, so the per-m² rate for a compact utility room will generally be higher than for a large open-plan floor. Extensive crack repair, a damp-proof membrane or complex edge detailing all add to the preparation cost. A free site survey is the only way to get an accurate quote for your specific project.
What affects the price
- System choice and thickness: a thin epoxy coating costs less per m² than a 9mm polyurethane screed
- Slab condition: grinding, crack repair and DPM work are costed at survey stage
- Floor area: larger areas benefit from economies of scale; areas under 30m² may carry a minimum charge
- Coving and edge detailing: coved skirting in commercial kitchens adds labour and material cost
- Access: any site restrictions that affect how the crew works are discussed and agreed before installation
- VAT: may be applicable; confirmed at quotation stage
Frequently asked questions
Book a free survey in Esher
Tell us about the floor and we will come and look at it. No obligation, and a written quote afterwards.